Affichage du fichier PDF http://www.antec.com/pdf/manuals/P160W_Manual.pdf

Moteur de recherche de manuels PDF - Documentation PDF
Documentation PDF Moteur de recherche de manuels PDF - Documentation PDF  
Que recherchez-vous ?      Chercher

  

User's Manual Manuel de l'utilisateur Anwenderhandbuch ... - Antec


Extrait du fichier http://www.antec.com/pdf/manuals/P160W_Manual.pdf (au format texte) :
P160W
User's Manual Manuel de l'utilisateur Anwenderhandbuch Manuale per l'operatore Manual del usuario

Table of Contents
Table des matières / Inhaltsverzeichnis Índice / Indice

English Français Deutsch Italiano Español

1 8 14 21 28

At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new P160W case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.

Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures. For detailed instructions on installing your motherboard and peripherals, please refer to the user manuals supplied with your components and drives.

P160W User's Manual We don't include a power supply with the P160W, so you're free to choose one that best suits your needs. Make sure you choose a PS/2 size power supply that conforms to the ATX12V standard and is compatible with your motherboard. Setting Up 1. Take the case out of the box. Remove the Styrofoam and plastic bag. 2. Put the case on a flat surface. 3 Remove the thumbscrews from the back of the side panel that has the circular latches. Unlock the panel by turning the latch handles at the top of the panel counter-clockwise. Open the panel by swinging it down. Then pull it away from the case and set it aside. 4. Inside the case, you'll see wiring with marked connectors (USB, PWR, etc.) and an installed I/O panel. You'll also find a bag of hardware (screws, brass standoffs, drive rails, etc.). 5. Remove the front bezel by pulling it away from the case. Start at the bottom, detach the middle, and finish with the top. Remember to disconnect the wiring from the front bezel. Set the bezel safely aside. Installing the Power Supply 1. With the case upright, place the power supply on the support beam that runs from the 5.25" drive bays to the back of the case. Note: most dual-fan power supplies should be installed with the second fan towards the bottom of the case. 2. Push the power supply to the back of the case and align the mounting holes. 3. Attach the power supply to the case, using the screws provided. Installing the Motherboard This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. 2. Lay the case down, with the open side facing up. The drive cages should be visible. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn't suitable, please contact your motherboard manufacturer for the correct I/O panel. You'll see a removable motherboard tray inside the case. Unscrew
2

3.

the thumbscrews on the tray retaining plate (see Photo 1) and remove it. 4. Slide the motherboard tray towards the drive cage and pull up to remove it. Place the tray on a flat surface. Photo 1 5. Line up your motherboard with the stand off holes, and remember which holes are lined up. Not all motherboards will match with all of the provided holes; this is normal, and won't affect functionality. 6. Screw the brass standoffs into the threaded holes that line up with your motherboard. Do not overtighten the standoffs. Some standoffs may be pre-installed for your convenience. 7. Place your motherboard on the brass standoffs. 8. Attach your motherboard to the standoffs with the provided Phillips-head screws. Your motherboard is now installed. 9. Replace the motherboard tray in the case and slide it into position. 10. Reinstall the motherboard tray retaining plate. Connecting the Front Control Panel with Temperature Display The P160W includes a front control panel that can rotate up to 45 degrees. It contains Power and Reset buttons, two USB 2.0-compatible ports, one IEEE 1394 (FireWire, i.Link) port, Audio In/Out jacks and a temperature display. To power the LED temperature display, connect a 4-pin power connector from the power supply to the 4-pin connector that powers the front panel. Connecting the Power Switch and LEDs 1. Connect the main power connector and 4-pin +12V connector from your power supply to your motherboard. 2. The Reset switch (labeled RESET SW) connects to your motherboard at the RST connector. Make sure you always attach the colored wire to Pin 1, and the black wire to ground. 3. Connect the Power Switch (labeled POWER SW) to the PWR connector on the motherboard. 4. Connect the Power LED (labeled POWER) and HDD LED connectors to the appropriate headers on your motherboard. 5. Decorative Blue LED: The front panel includes three decorative blue LEDs over each of the front air intake vents. Locate the Molex 4-pin male connector from the bezel and connect it to a 4-pin connector from the power supply. The LEDs will light when you power-up your system. Connecting the USB Ports You will find a single 10-pin connector on a cable attached to the front USB ports. This is an Intel standard connector, which is keyed so that it can't be accidentally, reversed when connected to a proper Intel standard motherboard. Connect the 10-pin connector to the motherboard headers so that the blocked pin fits over the missing header pin. Note: Please check the motherboard manual for the USB header pin layout and make sure it matches the attached table. If it does not match this Intel standard, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 Europe) to buy a
3

USB adapter. This adapter will allow you to connect the front USB to the moterboard on a pin-by-pin basis. Motherboard Pin Layout
1 2 Pin 1 3 5 7 9 9 10 Signal Names USB Power 1 Negative Signal 1 Positive Signal 1 Ground 1 Key (No conection) Pin 2 4 6 8 10 Signal Names USB Power 2 Negative Signal 2 Positive Signal 2 Ground 2 Empty Pin

Connecting the IEEE 1394 (FireWire®, i.Link®) Port You will find a single 10-pin connector on a cable attached to the front IEEE 1394 connection. This is an Intel standard connector, which is keyed so that it can't be accidentally reversed when connected to a proper Intel standard motherboard header. Connect the 10-pin connector to the motherboard header so that the blocked pin fits over the missing header pin. Note: Please check the motherboard manual for the IEEE 1394 header pin layout and make sure it matches the attached table. If you intend to connect the front FireWire port to an IEEE 1394 add-on card that comes with an externaltype IEEE1394 connector, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 (Europe) for to buy an adapter. This adapter will allow you to connect the front IEEE 1394 port to the external-type connector. Pin Assignment for Front Panel IEEE 1394 Connector
1 2 Pin 1 3 5 7 9 9 10 Signal Names TPA+ Ground TPB+ +12V (Fused) Key (No Pin) Pin 2 4 6 8 10 Signal Names TPA­ Ground TPB­ +12V (Fused) Ground

Connecting the Audio Ports The front panel speaker and microphone connection features an Intel-standard 10-pin connector, with 7 additional individual wires and connectors. If your motherboard supports Intel's standard onboard audio connector, you can plug the 10-pin connector directly into the board. Otherwise, you'll need to attach the 7 individual connectors to the motherboard. Here's how: Locate the internal audio connectors on your motherboard or sound card. Consult your motherboard or sound card manual for the pin-out positions. 1. 2. 3. 4. Connect Connect Connect Connect the the the the MIC connector to the microphone power pin. MIC-BIAS connector to the microphone input pin. AUD GND connector to the ground pin. FPOUT-R connector to the Front Right Speaker Out Pin.
4

5. 6. 7.

Connect the FPOUT-L connector to the Front Left Speaker Out Pin. Connect the RET-R connector to the Rear Right Speaker Out Pin. Connect the RET-L connector to the Rear Left Speaker Out Pin. Note: If your motherboard doesn't support rear speaker output, you don't need to connect the RET-R or RET-L connectors.

Connecting the Temperature Display Sensor There are two temperature sensors connected to the front display. Every 3 seconds, the temperature display cycles automatically between them. 1. There are two 30" (76 cm) long temperature sensor wires. For best temperature monitoring, we suggest you connect one sensor to the hard drive and the other to the motherboard. There is a 26" (66 cm) long cable with a switch connected to the front control panel. The switch toggles the temperature display between Celsius (C°) and Fahrenheit (C°). The default setting is Celsius (C°).

2.

Installing 5.25" Devices The P160W features four external 5.25" drive bays. You'll find the drive rails inside the toolbox. 1. Carefully remove the sheet metal covering the drive bay by twisting it back and forth until it separates from the case. Watch your fingers; when you remove the sheet metal, there may be a sharp metal burr remaining where the plate was attached. Mount two drive rails onto the sides of the 5.25" #2 #1 device. Make sure the metal tab angles out away from, and faces towards, the front of the device. Note: If you want to mount your drive flush to the front bezel, use the first screw hole on the rails (marked #1 in Photo 2) to mount the drive rails. If Photo 2 you want to use one of the color-coordinated CD- ROM cover plates, mount the rails with the second screw hole (marked #2 in Photo 2). The plates are included with the P160. Slide the device into the drive bay until you hear a click. Mount the other devices accordingly. Connect a large 4-pin white connector from the power supply to the male 4-pin connector on each of the devices.

2.

3. 4. 5.

Installing External 3.5" Devices You'll find two external 3.5" drive bays underneath the 5.25" drive bays. 1. 2. With the front bezel removed, unscrew the two thumbscrews at the sides of the 3.5" drive tray and pull the 3.5" drive tray out of the case. Mount your floppy drive or other external device in the drive tray. If needed, repeat the same procedure for the other drive. Note: We've included one color-coordinated floppy drive cover plate with the P160W. If you want to use the cover plate, leave enough room for it when mounting the drive (as indicated by #1 in Photo 3). If you want your device to sit flush to the bezel front, use the other set of mounting holes (as indicated by #2 in Photo 3).
5

3. 4. 5.


  Fiche société Accès au site  


Les fichiers PDF en rapport avec le site www.antec.com...

OVERTURE II
www.antec.com
OVERTURE II User's Manual Manuel de l'utilisateur Anwenderhandbuch Manuale per l'operatore Manual del usuario Table of Contents Table des matières / Inhaltsverzeichnis Índice / Indice English Français Deutsch Italiano Español 1 7 12 17 22 At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publicati
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fmanuals%2FovertureII_Int.pdf
SMARTPOWER 2.0 - Antec
www.antec.com
Make the smarter choice User's Manual Manuel de l'utilisateur / Anwenderhandbuch Manuale per l'operatore / Manual del usuario SMARTPOWER 2.0 THE SMARTER CHOICE Antec SmartPower 2.0 - Manuel de l'utilisateur Bloc d'alimentation ATX12V version 2.0 Modèles : SP-350, SP-400, SP-450 Les blocs d'alimentation SmartPower 2.0 sont conformes aux dernières spécifications d'ATX12V version 2.0. Ils incluent un circuit de sortie 12V double qui délivre une alimentation plus sûre et fiable aux composants de vo
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fmanuals%2FSmartPower2_Fr.pdf
Micro Portable Magazine N° 14 - 01/02/2007 - 330
www.antec.com
N° et date de parution : 14 - 01/02/2007 Diffusion : 150000 Périodicité : Bimestriel MicroPor_14_53_330.pdf Page : 53 Taille : 95 % Antec NoFeBook Cooler S rune Le double ventilateur ..' .née ce a . il la , il . . e rés à , . NofeBook Cooler de Antec se place sous votre PC portable relevant arrière pour faire circuler un air plus frais S , l' . Votre PC portable définitivement remisé votre PC de bureau dans un placard Mais voilà produit de chaleur tel point qu' serait capable de remplacer un cha
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fpress%2FMicroportablemagazine_notebokkcoolerS.pdf
User's Manual Manuel d'utilisation Benutzerhandbuch ... - Antec
www.antec.com
User's Manual Manuel d'utilisation Benutzerhandbuch Istruzioni per l'uso Manual para el Usuario Caractéristiques : · Refroidisseur en aluminium disperse un maximum de chaleur · Deux capteurs de température monitorent la température du disque dur et du boîtier · Inclut deux ventilateurs à vitesse variable par contrôle thermique et filtre à air lavable · Affiche la température en degrés Celsius et Fahrenheit · Protection EMI aux normes industrielles · Supporte disques durs IDE et SCSI haute vites
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fmanuals%2Fhdcs_fr.pdf
User's Manual
www.antec.com
P190 User's Manual Manuel de l'utilisateur Anwenderhandbuch Manuale per l'operatore Manual del usuario 1 2 3 4 5 30 1 31 6 7 8 32 26 25 29 28 27 11 12 13 14 9 10 8 51 23 22 24 16 17 15 18 19 20 21 # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Description Left Side Panel Upper 140mm Fan Mount Chassis Right Side Panel Front Bezel 5.25" Drive Bay Cover 5.25" Drive Rail Removable Washable Air Filter 3.5" Drive Bay Cover 3.5" Drive Rail Reset Button Power Button Front Port Assembly Key Lock Rubber Silic
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fdrawings%2FP190_manual_mechdrawing.pdf
SLK3700-BQE
www.antec.com
SLK3700-BQE User's Manual Manuel de l'utilisateur Anwenderhandbuch Manuale per l'operatore Manual del usuario Chez Antec, nous affinons et améliorons continuellement nos produits afin de garantir une qualité supérieure. Il est donc possible que votre nouveau boîtier diffère sensiblement des descriptions contenues dans ce manuel. Il ne s'agit pas là d'un problème, juste d'une amélioration. A compter de la date de publication, toutes les fonctionnalités, descriptions et illustrations contenues da
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fmanuals%2F3700BQE_fr.pdf
NeoPower series_manual.indd
www.antec.com
NeoPowerTM 430/500/550/650 User's Manual Manuel de l'utilisateur Anwenderhandbuch Manuale per l'operatore Manual del usuario Manuel de l'utilisateur NeoPowerTM 430/500/550/650 Bloc d'alimentation modulaire écoénergétique Ce manuel couvre la gamme complète de blocs d'alimentation NeoPower. Cette gamme de blocs d'alimentation augmente la distribution d'alimentation. Le NeoPower (sauf le NeoPower 430) est conforme à la norme ATX12V version 2.2/EPS12V et satisfait les toutes dernières exigences des
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fmanuals%2FNeoPower_series_manual_FR.pdf
Sonata III.indd
www.antec.com
Sonata III User s Manual Manuel de l utilisateur Anwenderhandbuch Manuale per l operatore Manual del usuario ªE@€âÌ 3 2 1 4 5 7 8 14 17 15 16 12 13 9 10 11 # Description # Description 1
http%3A%2F%2Fwww.antec.com%2Fpdf%2Fdrawings%2FSonataIII_manual_mechdrawing.pdf

les produits Antec dans la boutique

  PROMO

Alimentation ANTEC VP 600P-EC

Antec

Alimentation ANTEC VP 600P-EC

59.00 €  64.18 €


 

  PROMO

ANTEC SP1 Enceinte Bluetooth - Autonomie 10h - Blanc

Antec

ANTEC SP1 Enceinte Bluetooth - Autonomie 10h - Blanc

54.99 €  0.00 €


 

  PROMO

ANTEC Système de refroidissement - NB Cooler - 2 ventilateurs de 80 mm

Antec

ANTEC Système de refroidissement - NB Cooler - 2 ventilateurs de 80 mm

24.99 €  0.00 €


 

  PROMO

ANTEC - Boitier PC - Window GX505 LED Bleu - Noir

Antec

ANTEC - Boitier PC - Window GX505 LED Bleu - Noir

59.99 €  0.00 €


 

  PROMO

ANTEC - Alimentation PC - VP SERIES VP600P ATX 600W

Antec

ANTEC - Alimentation PC - VP SERIES VP600P ATX 600W

59.00 €  63.50 €


 
Alimentation PC Antec VP 600P-EC

Antec

Alimentation PC Antec VP 600P-EC

59.00 €


 
ANTEC - Boitier PC - VSK3350EP 350W - Noir

Antec

ANTEC - Boitier PC - VSK3350EP 350W - Noir

64.90 €


 


Les fichiers PDF à découvrir...

  • [Advance] GALAXY S4 - Samsung
    www.samsung.com
    Welcome to SAMSUNG SMART Academy (Advance) Duration : 2 hours To save the environment by reducing paper wastage, physical handouts will not be provided But you can write down your email to us on the feedback form after training & we will email to you ðJ Maximize your Galaxy S4 s capabilities 1. Intelligent Features (Air View, Air Gesture, Smart features, Group Play, etc) 2. Find My Mobile (Remote control your device over findmymobile website) 3. Samsung Link & Home solution with HomeSync (Easi
    http://www.samsung.com/sg/smartacademy/materials/pdfs/Advance_GalaxyS4.pdf
  • Règlement - Rowenta
    www.rowenta.fr
    Règlement Article 1 La société GROUPE SEB France, société par actions simplifiée ayant son siège au 2, place Ambroise Courtois ­ 69355 LYON cedex 08, immatriculée au RCS de Lyon sous le numéro 440 410 637 organise un jeu gratuit sans obligation d'achat intitulé « 100 cadeaux design V2» sur le site Internet www.rowenta.fr à l'occasion des 100 ans Rowenta. Article 2 Ce jeu est gratuit et sans obligation d'achat. Il se déroule sur le site Internet www.rowenta.fr , du 15 septembre 2009 à 9H00 (heure
    http://www.rowenta.fr/rowenta/rowenta100ans/pdf/reglement.pdf
  • Fiche produit Sony : 02/1237479679402.pdf
    www.sony.fr
    Règlement (CE) n° 1907/2006 ­ REACH Obligation relative à la communication des informations sur les substances dans les articles au sens du Règlement CE n° 1907/2006 du Parlement Européen et du Conseil du 18 décembre 2006, concernant l'enregistrement, l'évaluation, l'autorisation et la restriction des produits chimiques (Registration, Evaluation, Authorization and Restriction of Chemicals - REACH) La « liste candidate» des substances extrêmement préoccupantes conformément à l'article 59 (1,10) d
    http://www.sony.fr/res/attachment/file/02/1237479679402.pdf
  • Über Kyocera
    www.kyocera.fr
    Communiqué de presse Kyocera à la conférence UE PVSEC 2010 Module solaire 60 cellules : Kyocera augmente la puissance à 240 watts Kyoto / Neuss, 26 août 2010 - Le groupe technologique japonais Kyocera, un des leaders de la fabrication de modules photovoltaïques, lance sur le marché un nouveau module haute performance dédié aux installations offrant de grandes surfaces au sol ou en toiture intégrée pour les bâtiments industriels et agricoles. Le KD240GH-2PB est doté de 60 cellules pour une puissa
    http://www.kyocera.fr/poolcontent/fr/fr/solar_electric_systems/news/2010/module_solaire_avec.-cps-41233-files-41193-File.cpsdownload.tmp/kyocera_solar_kd240gh_2pb_fr.pdf
  • ?? - Logitech
    www.logitech.com
    COLOR SPECIFICATIONS BRAND / LAUNCH: Logitech 2010 SPOT COLORS PROJECT TITLE: Gomera DIE LINE COLOR (NO PRINT) DIE LINES DETAILS: AMR / GSW Guide PROCESS COLORS K 5 25 50 75 95 DIELINE NAME: n/a DIELINE RECEIVED: n/a SPECIFICATIONS / NOTES: Final files Job is grey scale THIS PRINT SIZE / SCALE: 100% of original Designer: Gregory Gomez Location: Fremont, CA, USA MODIFICATION DATE: January 18, 2010 Getting started with Logitech® Wireless Mouse M310 Help with setup ‹¾n^.R© Á$ÎX ³ÄÆÀ¹Ð
    http://www.logitech.com/assets/32378/5/m310-getting-started-with-guide.pdf
  • Acer Easy MP3 Player - ftp
    ftp.acer-euro.com
    Acer Easy MP3 Player Manuale dell utente Copyright Copyright 2004 di Acer Inc., tutti i diritti riservati. Nessuna parte della presente pubblicazione può essere riprodotta, trasmessa, trascritta o immagazzinata in un sistema informatico oppure tradotta in qualsiasi lingua o linguaggio di programmazione, in nessuna forma o mezzo, sia esso elettronico, meccanico, magnetico, ottico, chimico, manuale ecc., senza una previa autorizzazione da parte di Acer Computer GmbH. Esclusione di responsabilità
    ftp://ftp.acer-euro.com/storage/easy_mp3_player/Manual/Italian_Manual.pdf
  • Mode d'emploi
    www.indesit.fr
    Mode demploi REFRIGERATEUR 2 PORTES Sommaire F Français, 1 E Espanol, 11 Installation, 2 F Mise en place et raccordement Réversibilité des portes Description de lappareil, 3 Vue densemble Mise en marche et utilisation, 4-5 Mise en service de lappareil Réglage de la température Pour profiter à plein de votre réfrigérateur Pour profiter à plein de votre congélateur Entretien et soins, 6 RA 25 (FR) TA 12 (FR) TAA 12 (FR) Mise hors tension Nettoyage de lappareil Contre la formation de moisissures et
    http://www.indesit.fr/indesit/_pdf/manuals/19506973101_FR-ES.pdf
  • Tenchu_00_01 [Converted].ai - Nintendo
    www.nintendo.com
    NEED HELP WITH INSTALLATION, MAINTENANCE OR SERVICE? NINTENDO CUSTOMER SERVICE WWW.NINTENDO.COM or call 1-800-255-3700 MON.-SUN., 6:00 a.m. to 7:00 p.m., Pacific Time (Times subject to change) BESOIN D AIDE POUR L INSTALLATION, L ENTRETIEN OU LA RÉPARATION? SERVICE À LA CLIENTÈLE DE NINTENDO WWW.NINTENDO.COM ou appelez le 1 (800) 255-3700 LUN.-DIM., entre 6 h 00 et 19 h 00, heure du Pacifique (Heures sujettes à changement) Nintendo of Canada Ltd. 110 - 13480 Crestwood Place Richmond, B.C. V6V
    http://www.nintendo.com/consumer/gameslist/manuals/DS_Tenchu_Dark_Secret.pdf
 
  Accueil  -   Soumettre un fichier  -   La boutique  -   Infos légales  -   A propos de Documentation-pdf
Documentation PDF copyright @ BL-Dev 2018