A-CNK-100- 13 (1)
Screen Management System
Projectionist Terminal
Operating Instructions
Before using the Projectionist Terminal, please read this manual thoroughly and retain it for future reference. Refer to the Chapter appropriate to your System configuration.
LSM-100
Software Version 1.30
© 2007 Sony Corporation
NOTICE TO USERS
Program © 2007 / Documentation © 2007 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation.
critical to follow the lamp manufacturer's safety instructions when handling Xenon arc lamps. Always wear eye/face and body protection when handling Xenon arc lamps. Large XENON short-arc lamps are shipped inside special protective shields which will contain the envelope fragments if the lamp is dropped and explodes. The shield is removed once the lamp is installed in the lamp housing. When the lamp reaches the end of its useful life, the protective shield is put back on the lamp, and the spent lamp is then removed from the equipment and disposed of. Note: The risk of explosion increases as the lamp is used. For this reason, it is important to observe the manufacturer's recommended operating life limits. Refer to the handling and disposal instructions for the XENON ARC LAMPS which were provided by the manufacturer and included with the lamp.
SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
Ultraviolet Radiation All XENON short-arc lamps generate significant amounts of ultraviolet radiation while in operation. Xenon has strong spectral lines in the UV bands, and these readily pass through the fused quartz lamp envelope. Projector systems should always be operated with all covers closed even when testing the system and content security is not an issue.
Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice.
NOTICE
The software described herein may also be governed by the terms of a separate user license agreement. The SRX Controller application exercises direct control over the projector via the projector's serial control port. Operations using the SRX Controller can be in conflict with operations using the Projectionist Terminal or the SMS Controller. The SRX Controller application should not be used at the same time the Projectionist Terminal or SMS Controller is in operation. Once changes using the SRX Controller are completed, REFRESH the Projector Data (Maintenance screen) to the SMS Server stored data.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Adobe, Acrobat and Acrobat Reader are trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other company and product names are trademarks or registered trademarks of the respective companies or their respective makers.
WARNING
The projection system uses HIGH PRESSURE XENON SHORT-ARC LAMPS as a light source. These lamps have a high internal pressure. Depending upon the lamp, the internal pressure can exceed 10 ATM or 147 PSI, even when not in operation. In addition, Xenon arc lamps can burst when not in operation causing serious injuries! It is
i
Table of Contents
Chapter 1 User Guide - R110
Login .................................................................................................2 Logout ................................................................................................... 2 Show Information ............................................................................3 Base Screen ........................................................................................... 3 View Show Status ................................................................................. 3 STOP/PLAY Show Presentation........................................................... 4 Show Schedules ..............................................................................5 View Show Schedules ........................................................................... 5 View Show Details ................................................................................ 5 View Content Element Details .............................................................. 6 Media Block...................................................................................... 7 Access Media Block.............................................................................. 7 Projector Control ............................................................................. 9 Set Projector to ON/STANDBY ........................................................... 9 Douse the Projector ............................................................................... 9 Select Projector Function .................................................................... 10 Function Setup............................................................................... 11 Select "Target" Function Key ............................................................. 11 Select Test Pattern ............................................................................... 12 Adjust Lamp Power............................................................................. 12 Adjust Projector................................................................................... 12 Maintenance ...................................................................................14 Lamp Select......................................................................................... 14 Lamp Hours/Reset ............................................................................... 15 Theater Network Setup.................................................................. 16 IP Address Assignment ....................................................................... 16 DNS Address Assignment................................................................... 17 Status.............................................................................................. 18 Power Status ........................................................................................ 18 Lamp Status......................................................................................... 18 Fan ....................................................................................................... 19 Temperature......................................................................................... 20 System Message .................................................................................. 20 Power ON/OFF ............................................................................... 20 MAINS - A/C ON ............................................................................... 21 Power Up............................................................................................. 21 Shutdown............................................................................................. 22
Table of Contents
ii
Chapter 2 User Guide - R220
Login ...............................................................................................25 Logout ................................................................................................. 25 Show Information ..........................................................................26 Base Screen ......................................................................................... 26 View Show Status ............................................................................... 26 STOP/PLAY Show Presentation......................................................... 27 Show Schedules ............................................................................28 View Show Schedules ......................................................................... 28 View Show Details .............................................................................. 28 View Content Element Details ............................................................ 29 Media Block.................................................................................... 30 Access Media Block............................................................................ 30 Projector Control ........................................................................... 32 Set Projector to ON/STANDBY ......................................................... 32 Douse the Projector ............................................................................. 33 Change Projector Function.................................................................. 33 Set Luminance Offset.......................................................................... 34 Function Setup............................................................................... 35 Verify "Target" Function .................................................................... 35 Adjust Lamp Power............................................................................. 35 Adjust Projector................................................................................... 36 Maintenance ...................................................................................38 Refresh Projector Data ........................................................................ 39 Lamp Information................................................................................ 39 Adjust/Test .......................................................................................... 40 Theater Network Setup.................................................................. 41 IP Address Assignment ....................................................................... 41 DNS Address Assignment................................................................... 42 Status.............................................................................................. 43 Power Status ........................................................................................ 44 Lamp Status......................................................................................... 44 Fan ....................................................................................................... 45 Temperature......................................................................................... 46 System Message .................................................................................. 46 Power ON/OFF ............................................................................... 46 MAINS - A/C ON ............................................................................... 46 Power Up............................................................................................. 47 Shutdown............................................................................................. 47
iii
Table of Contents
User Guide - R110
Chapter 1 User Guide - R110
