User and maintenance manual Manuel d'utilisation et d ...

Extrait du fichier (au format texte) :

AKZM 778

EN

User and maintenance manual
Manuel d utilisation et d entretien
Handleiding voor gebruik en onderhoud

IT

Manuale d uso e manutenzione
Manual del usuario y de mantenimiento

IMPORTANT SAFETY INSTRUCTIONS
YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT
This manual and the appliance itself provide important safety warnings, to be read and observed at all times.
This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.
All safety warnings are preceded by the danger symbol and the following terms:
DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could cause serious injury.

All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions:
- The appliance must be disconnected from the power supply before carrying out any installation work.
- Installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer s instructions and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in the user manual.
- Power cable replacement must be carried out by a qualified electrician. Contact an authorized service centre.
- Regulations require that the appliance is earthed.
- The power cable must be long enough for connecting the appliance, once fitted in its housing, to the main power supply.
- For installation to comply with current safety regulations, an allpole disconnect switch with minimum contact gap of 3 mm must be utilized.
- Do not use multiple plug adaptors if the oven is fitted with a plug.
- Do not use extension leads.
- Do not pull the power supply cable.
- The electrical components must not be accessible to the user after installation.
- If the surface of the induction plate is cracked, do not use it and

Les promotions



AKT 807 FICHE PRODUIT DIMENSIONS DE LA TABLE DE ...
AKT 807 FICHE PRODUIT DIMENSIONS DE LA TABLE DE ...
20/03/2015 - docs.whirlpool.eu
AKT 807 FICHE PRODUIT FR 2 3 1. Foyer radiant Ø 145 2. Foyer radiant Ø 180 3. Foyer radiant double Ø 280 4. Afficheur Attention : Afin d éviter que la surface vitrocéramique ne subisse des dommages irréversibles, n utilisez pas : - d ustensiles dont le fond n est pas parfaitement plat. - de casseroles en métal avec fond émaillé. Tout défaut esthétique (rayures, traces sur la surface, etc.) doit être communiqué immédiatement, dès l installation. 1 4 DIMENSIONS DE...

P TABELA DE PROGRAMAS 5019 301 06525
P TABELA DE PROGRAMAS 5019 301 06525
20/03/2015 - docs.whirlpool.eu
30106525P.fm Page 1 Monday, July 25, 2011 5:53 PM P TABELA DE PROGRAMAS C Carga máx. Etiquetas dos cuidados com a roupa kg Algod. 95 °C 95 °C Algodão 40 - 60 °C Algod. 40 - 60 °C 40 - 60 °C G. Botão Centrifugação  H. Botão Início diferido  I. Indicador da sequência de programas F Tipo de lavagem/Notas - Respeite as recomendações do fabricante na etiqueta de cuidados com a roupa Roupa de algodão branca resistente normalmente a muito suja. Em caso de muita Algodão 95...

SL VGRADNO PLINSKO KUHALIŠCE
SL VGRADNO PLINSKO KUHALIŠCE
20/03/2015 - docs.whirlpool.eu
SL VGRADNO PLINSKO KUHALI` E POMEMBNA VARNOSTNA NAVODILA VA`A VARNOST IN VARNOST DRUGIH OSEB STA IZREDNO POMEMBNI V navodilih za uporabo in na napravi so pomembna varnostna sporo ila, ki jih mora uporabnik prebrati in vselej upoatevati. To je simbol za varnostno opozorilo, ki se nanaaa na varnost ter opozarja uporabnike na potencialno nevarnost za uporabnike in druge osebe. Vsa varnostna sporo ila bodo sledila simbolu za varnostno opozorilo ali enemu od izrazov: RU BG - CZ SK AE RO GR Po...

GB AKT 725 BUILT-IN GAS HOB - whirlpool documents
GB AKT 725 BUILT-IN GAS HOB - whirlpool documents
20/03/2015 - docs.whirlpool.eu
GB AKT 725 BUILT-IN GAS HOB - IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and observed at all times. This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others. All safety messages will follow the safety alert symbol and either the terms: DANGER Indicates a hazardous situation which, if not avoided, will cause...

abcdefg
abcdefg
20/03/2015 - docs.whirlpool.eu
1 a b c d e f g 2 5 10 6 11 7 ( ) 12 3 8 B 13 4 9 A 14 ‹¾‹¡u( g,mˆcg:N•èu(NŽYtSïg:mv„ˆcriÿ ep‘Ïf/yÁNº [¶^­v„fn‘Ï0 " Ou(mˆcg:eöÿ ‹÷u[ˆÙN›Ou(‹ôfTŒz ^Vþˆh N-cÐO›v„‹ôf " OÝuYÙN›Ou(‹ôfTŒz ^VþˆhÿY‚gœ`¨mˆcg:

Scarica
Scarica
20/03/2015 - docs.whirlpool.eu
GUIDA RAPIDA C D E F G H I L D M E F N G H O P Q R I L M N O Funzione 6th Sense Fresh Control Permette di raggiungere rapidamente le condizioni di A conservazione ottimali per quanto riguarda la temperatura e B l umidità all interno dell apparecchio. Perché funzioni correttamente, é necessario che anche la C ventola sia attiva. Spegnimento allarmi acustici (Stop Alarm) Per disattivare i segnali acustici premere brevemente il pulsante . N

RO TABELUL CU PROGRAME 5019 301 06646
RO TABELUL CU PROGRAME 5019 301 06646
20/03/2015 - docs.whirlpool.eu
RO Indicatorul U_ deschis  Indicatorul Splare în desf_urare  Indicatorul Program terminat  L Ma_ina de splat este dotat cu funccii automate de siguranc care detecteaz _i diagnosticheaz defecciunile într-o faz timpurie _i v permit s reaccionaci corespunztor, de exemplu: H ÎncrTemperatur Simboluri ctur întrecinere max. kg I } Program H. I. J. K. Selectorul de programe Butonul Start/Pauz  Butonul Temperatur  Butonul Centrifugare...

artisan™ blender artisan™ blender blender/mixeur artisan ...
artisan™ blender artisan™ blender blender/mixeur artisan ...
20/03/2015 - docs.whirlpool.eu
ARTISAN!" BLENDER INSTRUCTIES ARTISAN!" BLENDER INSTRUCTIONS BLENDER/MIXEUR ARTISAN!" INSTRUCTIONS ARTISAN!" BLENDER/STANDMIXER BEDIENUNGSANLEITUNG FRULLATORE ARTISAN!" ISTRUZIONI PER L USO LICUADORA ARTISAN!" Français INSTRUCCIONES ARTISAN!" MIXER INSTRUKTIONER ARTISAN!" BLENDER BRUKSANVISNING ARTISAN!"-TEHOSEKOITIN OHJEET ARTISAN!" BLENDER INSTRUKTIONER LIQUIDIFICADOR ARTISAN!" INSTRUÇÕES ARTISAN!" BLANDARI LEIÐBEININGAR œ ›•¤•¡ ARTISAN!" O”H“IE£ Blender/mixeur modèle...
 
 

Téléphone éducatif Cars
Téléphone éducatif Cars
03/04/2012 - www.vtech-jouets.com
Manuel d'utilisation Téléphone éducatif Cars © 2009 Disney Chers parents, Chez VTech®, nous sommes conscients que les enfants sont notre avenir. C'est pourquoi tous nos jeux sont conçus de manière à entretenir et à renforcer leur désir d'apprendre. Toute la technologie et le sens de la pédagogie VTech® sont mis au service de la connaissance pour faciliter la découverte des mots, des chiffres, des couleurs. Chez VTech®, nous nous engageons à tout faire pour que les enfants grandissent...

Compressor 3 Batch Monitor User Manual - Apple
Compressor 3 Batch Monitor User Manual - Apple
27/11/2014 - manuals.info.apple.com
Batch Monitor User Manual You can use the Batch Monitor to view or adjust the status of batches and jobs processed by Compressor or Apple Qmaster. You can also use the Batch Monitor to view detailed history for recently completed batches and jobs. You use the Batch Monitor to monitor the transcoding progress of batches and jobs. You can pause, resume, cancel, and get the status for any submitted batch and/or any individual job, target, or target segment. Just as Printer Setup Utility allows you...

KIT2A1RW6
KIT2A1RW6
18/06/2012 - www.smeg.fr
KIT2A1RW6 Plinthe rouge bordeaux EAN13: 8017709106522 Option pour centre de cuisson CS19RW SMEG France 9, rue Linus Carl Pauling B.P. 548 76824 MONT SAINT AIGNAN Cedex Tél.: +33 (0)2 35 12 14 14 Fax : +33 (0)2 35 60 70 77

CM mac INDU fra
CM mac INDU fra
16/04/2012 - tools.professional.electrolux.com
Certifications ZANUSSI: Qualité: Nos usines de production et l'ensemble du processus de fabrication, de la conception à l'expédition y compris le service après-vente, ont obtenu le label de qualité ISO 900 I. Une reconnaissance internationale prestigieuse qui vous garantit le respect des normes de qualité et de fiabilité les plus strictes. Nos produits ont également obtenu l'approbation des Organismes Normatifs du monde entier, Normes CE, VDE et DVGB. Choisir ZANUSSI est une garantie supplémentaire...

BOXBOY! 1 Informations importantes Pour commencer 2 Partage d ...
BOXBOY! 1 Informations importantes Pour commencer 2 Partage d ...
15/08/2019 - www.nintendo.com
BOXBOY! 1 Informations importantes Pour commencer 2 Partage d-informations 3 Fonctions en ligne 4 Avis aux parents et tuteurs Informations 5 Sauvegarder et effacer Comment jouer 6 Les niveaux 7 La carte du monde 8 La boutique 9 Envoi de la demo Depannage 10 Assistance 1 Informations importantes Veuillez lire ce mode d-emploi attentivement avant d-utiliser ce

tôle perforée titan - Dampere
tôle perforée titan - Dampere
17/05/2016 - www.tole-perforee-sur-mesure.com
FICHE TECHNIQUE TÔLES PERFORÉES www.tole-perforee-sur-mesure.com TÔLE PERFORÉE TITAN CATÉGORIE : MOTIF OBLONG RÉFÉRENCE : SPM 10404 PERFORATION: Trous oblong de 3x30 mm VIDE 27 % COURANT: 2000 X 1000 mm BASE: 3000 X 1500 mm MAXI: 4000 X 1500 mm MATIÈRE Acier noir | Acier galva Acier inox | Aluminium Sur demande: - bronze, laiton, cuivre - peinture thermolaquage ou anodisation bronze ou champagne ÉPAISSEUR : 2 mm et 3 mm Délai de production: 10 jours ouvrables après commande et validation...